Reverse Issues - Kawasaki KFX450 Forum - KFX450Central
  Yamaha YFZ450

Suzuki Z400

Suzuki LT-R450



Kawasaki KFX450

ATV Videos

Can-Am DS450
 
Reply
 
LinkBack Thread Tools Search this Thread
Old 08-03-2008, 10:02 PM   #1 (permalink)
Junior Member
 
goldp1976's Avatar
 
Join Date: Jul 2008
Posts: 22
Default

I was riding in the sand dunes this weekend and after a long day of riding I went to put my quad in reverse and it engaged but the engine sputtered and would not push me back as it's supposed to (it would catch and release). It did this with the clutch pulled in when in reverse as well. It sounded like I was bouncing off of a rev limiter, however, I wasn't holding the throttle all the way. No matter how easy I was on the throttle it did the same thing. When I put the quad back in 1st gear everything was okay. The next morning when I put it in reverse it worked fine.

Is there some kind of reverse limiter or overheating cutoff for reverse that anyone knows about?
goldp1976 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 08-03-2008, 11:20 PM   #2 (permalink)
Member
 
JAYHAWKTRAILERS's Avatar
 
Join Date: Jul 2008
Location: DENVER COLORADO
Posts: 36
Send a message via Yahoo to JAYHAWKTRAILERS
Default

QUOTE (Black Kawi @ Aug 3 2008, 08:03 PM)
Quote:
I was riding in the sand dunes this weekend and after a long day of riding I went to put my quad in reverse and it engaged but the engine sputtered and would not push me back as it's supposed to (it would catch and release). It did this with the clutch pulled in when in reverse as well. It sounded like I was bouncing off of a rev limiter, however, I wasn't holding the throttle all the way. No matter how easy I was on the throttle it did the same thing. When I put the quad back in 1st gear everything was okay. The next morning when I put it in reverse it worked fine.

Is there some kind of reverse limiter or overheating cutoff for reverse that anyone knows about?


Walden? I have not had any issues with reverse....
__________________
Anthony Camacho


Jayhawk Trailers
Denver Colorado

08 KFX450R Special Edition, Black, PC-III tuner, Fuel ATV Intake System, Pro-Circuit TI4 Titanium full exhaust, Dyno Tuned by Corey at Advantage Tuning (SandDaddy), 13t front, Monster Energy factory Graphics kit by N~Style, Motion Pro twist throttle, Pro-Taper pillow top grips, Skat-Trak 21x12.00-8 6-paddle Hauler's, Skat-Trak 21x7-10 Mohawk's, Powder Coated Douglas Blue Lable wheels on all 4 corners.
JAYHAWKTRAILERS is offline   Reply With Quote
Old 08-04-2008, 09:56 AM   #3 (permalink)
Junior Member
 
goldp1976's Avatar
 
Join Date: Jul 2008
Posts: 22
Default

QUOTE (JAYHAWKTRAILERS @ Aug 3 2008, 09:21 PM)
Quote:
Walden? I have not had any issues with reverse....

It was Walden. It was a weird sputtering issue with reverse that went away in the morning. The only thing I can think was that my bike was very hot since I rode it hard. I don't know.
goldp1976 is offline   Reply With Quote
Old 08-04-2008, 12:12 PM   #4 (permalink)
Member
 
JAYHAWKTRAILERS's Avatar
 
Join Date: Jul 2008
Location: DENVER COLORADO
Posts: 36
Send a message via Yahoo to JAYHAWKTRAILERS
Default

QUOTE (Black Kawi @ Aug 4 2008, 07:57 AM)
Quote:
It was Walden. It was a weird sputtering issue with reverse that went away in the morning. The only thing I can think was that my bike was very hot since I rode it hard. I don't know.

Heat could be the problem... Besides that, How did it do in the sand? I have not got the chacnce to get mine up there......
__________________
Anthony Camacho


Jayhawk Trailers
Denver Colorado

08 KFX450R Special Edition, Black, PC-III tuner, Fuel ATV Intake System, Pro-Circuit TI4 Titanium full exhaust, Dyno Tuned by Corey at Advantage Tuning (SandDaddy), 13t front, Monster Energy factory Graphics kit by N~Style, Motion Pro twist throttle, Pro-Taper pillow top grips, Skat-Trak 21x12.00-8 6-paddle Hauler's, Skat-Trak 21x7-10 Mohawk's, Powder Coated Douglas Blue Lable wheels on all 4 corners.
JAYHAWKTRAILERS is offline   Reply With Quote
Old 08-04-2008, 02:45 PM   #5 (permalink)
Junior Member
 
goldp1976's Avatar
 
Join Date: Jul 2008
Posts: 22
Default

QUOTE (JAYHAWKTRAILERS @ Aug 4 2008, 10:13 AM)
Quote:
Heat could be the problem... Besides that, How did it do in the sand? I have not got the chacnce to get mine up there......

The quad did excellent in the sand, better than I thought. My map is off though (I have the Dasa 13", Fuel ATV intake and PCIII) but it handled and climbed like a billy goat. I have my suspension dialed in and I was hitting all of those whoops mostly in 4th. I was able to do every single climb even though I have 20" Sand Stars. I used to have a Predator that was nearly as fast as my KFX and it would not climb like this quad due to the extra weight. The nimbleness of the quad was apparent through all of the trails in between the trees and I was able to side hill very easily due to the light weight (and probably the Sand Stars). I am looking to get some 6 paddle comps (21") so I can hook up better. Overall I was well pleased.
goldp1976 is offline   Reply With Quote
Old 08-04-2008, 04:10 PM   #6 (permalink)
Member
 
JAYHAWKTRAILERS's Avatar
 
Join Date: Jul 2008
Location: DENVER COLORADO
Posts: 36
Send a message via Yahoo to JAYHAWKTRAILERS
Default

QUOTE (Black Kawi @ Aug 4 2008, 12:46 PM)
Quote:
The quad did excellent in the sand, better than I thought. My map is off though (I have the Dasa 13", Fuel ATV intake and PCIII) but it handled and climbed like a billy goat. I have my suspension dialed in and I was hitting all of those whoops mostly in 4th. I was able to do every single climb even though I have 20" Sand Stars. I used to have a Predator that was nearly as fast as my KFX and it would not climb like this quad due to the extra weight. The nimbleness of the quad was apparent through all of the trails in between the trees and I was able to side hill very easily due to the light weight (and probably the Sand Stars). I am looking to get some 6 paddle comps (21") so I can hook up better. Overall I was well pleased.

I am glad to hear that, We are going to LS Sand Mountain Sept. 3 through the 9th if you are interested.....
__________________
Anthony Camacho


Jayhawk Trailers
Denver Colorado

08 KFX450R Special Edition, Black, PC-III tuner, Fuel ATV Intake System, Pro-Circuit TI4 Titanium full exhaust, Dyno Tuned by Corey at Advantage Tuning (SandDaddy), 13t front, Monster Energy factory Graphics kit by N~Style, Motion Pro twist throttle, Pro-Taper pillow top grips, Skat-Trak 21x12.00-8 6-paddle Hauler's, Skat-Trak 21x7-10 Mohawk's, Powder Coated Douglas Blue Lable wheels on all 4 corners.
JAYHAWKTRAILERS is offline   Reply With Quote
Old 08-04-2008, 05:09 PM   #7 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 21
Default

QUOTE (Black Kawi @ Aug 4 2008, 11:46 AM)
Quote:
The quad did excellent in the sand, better than I thought. My map is off though (I have the Dasa 13", Fuel ATV intake and PCIII) but it handled and climbed like a billy goat. I have my suspension dialed in and I was hitting all of those whoops mostly in 4th. I was able to do every single climb even though I have 20" Sand Stars. I used to have a Predator that was nearly as fast as my KFX and it would not climb like this quad due to the extra weight. The nimbleness of the quad was apparent through all of the trails in between the trees and I was able to side hill very easily due to the light weight (and probably the Sand Stars). I am looking to get some 6 paddle comps (21") so I can hook up better. Overall I was well pleased.
do you have those suspension settings written down? im currios as to what i should do with mine. my first QUAD and im going to the dunes this weekend.
BullCatcher is offline   Reply With Quote
Old 08-05-2008, 10:31 PM   #8 (permalink)
Junior Member
 
goldp1976's Avatar
 
Join Date: Jul 2008
Posts: 22
Default

QUOTE (BullCatcher @ Aug 4 2008, 03:10 PM)
Quote:
do you have those suspension settings written down? im currios as to what i should do with mine. my first QUAD and im going to the dunes this weekend.

http://quad.transworld.net/2006/03/13/gett...s/?show=gallery

This is a link on how to adjust shocks. Basically you adjust the preload (springs) to a specific percentage (known as sag). The compression and rebound (flat head screws on the top and bottom of your shocks) will control how fast your suspension goes up and down. When I first got mine it was like a pogo stick. After adjusting the preload according to the norm and playing with my compression and rebound it works great. You basically want the suspension to drop predictably and slowly come up. The idea is to use your entire suspension range. Most people only use 75% or less of the suspensions actual range of motion. You can really feel the quality of the suspension once it's dialed in for your body weight and riding type. I can hit the whoops in 4th wide open now.
goldp1976 is offline   Reply With Quote
Old 03-30-2010, 04:40 PM   #9 (permalink)
Junior Member
 
Join Date: Mar 2010
Posts: 1
Default

QUOTE (Black Kawi @ Aug 3 2008, 09:03 PM)
Quote:
I was riding in the sand dunes this weekend and after a long day of riding I went to put my quad in reverse and it engaged but the engine sputtered and would not push me back as it's supposed to (it would catch and release). It did this with the clutch pulled in when in reverse as well. It sounded like I was bouncing off of a rev limiter, however, I wasn't holding the throttle all the way. No matter how easy I was on the throttle it did the same thing. When I put the quad back in 1st gear everything was okay. The next morning when I put it in reverse it worked fine.

Is there some kind of reverse limiter or overheating cutoff for reverse that anyone knows about?

Doubt the problems still there, but for future use it has to do with the parking break. make sure the cable is not pulled out at all cause if it is pulled out even the slightest bit it will do that.
mwhelan4586 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 11:44 AM.



Powered by vBulletin® Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.2