Intake Porting - Kawasaki KFX450 Forum

Scott · 12-14-2008, 04:17 PM

Anyone have any Intake/head work done? What do you look for in a quality port job? thinking of using JSR.
seems as if all are charging about $450 for the work. Any sugestions for price or best performance/quality?

mx333 · 12-16-2008, 01:31 AM

Porting will make all the difference in the world. If the head does not flow right the bike will never run well. Choose wisely cause if you pick someone who has not alot of porting experence i would avoid them, pro circuit,dasa,rage,hetrick do alot of kawis check them out

12-16-2008, 01:31 AM	#2 (permalink)
mx333 Member Join Date: Nov 2008 Posts: 40	Porting will make all the difference in the world. If the head does not flow right the bike will never run well. Choose wisely cause if you pick someone who has not alot of porting experence i would avoid them, pro circuit,dasa,rage,hetrick do alot of kawis check them out __________________ 2008 Kfx 450 Roll long travel with Fox Floats Roll +2 stem with Fasst bars Lonestar Axle Hiper Whels With quadcross mx tires& douglous and maxxis for worcs Roll pegs,roll nerfs,roll heel guards Yoshi Pipe Fuel intake Dobeck programer Bored Tb LMR Porting Hot cams 13.5:1 cp piston Richochet skid plates More to come

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-14-2008, 04:17 PM	#1 (permalink)
Scott Junior Member Join Date: Oct 2008 Posts: 4	Anyone have any Intake/head work done? What do you look for in a quality port job? thinking of using JSR. seems as if all are charging about $450 for the work. Any sugestions for price or best performance/quality?

Remove Advertisements Sponsored Links
KFX 450 Central Advertisement