elka from Z400 to KFX - Kawasaki KFX450 Forum

TexasKFX · 12-16-2007, 03:28 AM

Have an 04 Z and was wondering if they would fit My new KFX without much changes besides valving and maybe a rate drop on them, Currently have on the Z trip rate PB sport/race series shocks.

**Atving4Christ** · 12-16-2007, 05:58 PM

I have a set of dune edition elkas from my 400. Found out from elka that you will have to have them rebuilt to fit the 450. Elka will do it for 200 a piece.

Larry

TexasKFX · 12-16-2007, 09:25 PM

thx

pual0101 · 01-28-2008, 10:30 AM

nvm

Rhino1 · 01-28-2008, 02:06 PM

QUOTE (Atving4Christ @ Dec 16 2007, 02:59 PM)

Quote:

I have a set of dune edition elkas from my 400. Found out from elka that you will have to have them rebuilt to fit the 450. Elka will do it for 200 a piece.

Larry

Rebuilt with respect to internals (shim stacks, etc.), or at the mounting points? TIA!

pual0101 · 01-28-2008, 03:11 PM

My guess is both ends would have to be switched over, should be relatively simply for them. Probably could get GT thunder or someone to work on you Elka's even for a lil cheaper

12-16-2007, 05:58 PM	#2 (permalink)
Atving4Christ Administrator Join Date: Oct 2006 Posts: 219	I have a set of dune edition elkas from my 400. Found out from elka that you will have to have them rebuilt to fit the 450. Elka will do it for 200 a piece. Larry __________________ HAD kfx400 (504cc) HAD kfx450r Now Have: Two Feet

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-16-2007, 03:28 AM	#1 (permalink)
TexasKFX Junior Member Join Date: Dec 2007 Location: Texas Posts: 21	Have an 04 Z and was wondering if they would fit My new KFX without much changes besides valving and maybe a rate drop on them, Currently have on the Z trip rate PB sport/race series shocks.

12-16-2007, 09:25 PM	#3 (permalink)
TexasKFX Junior Member Join Date: Dec 2007 Location: Texas Posts: 21	thx

01-28-2008, 10:30 AM	#4 (permalink)
pual0101 Junior Member Join Date: Jan 2008 Posts: 21	nvm

01-28-2008, 03:11 PM	#6 (permalink)
pual0101 Junior Member Join Date: Jan 2008 Posts: 21	My guess is both ends would have to be switched over, should be relatively simply for them. Probably could get GT thunder or someone to work on you Elka's even for a lil cheaper

Remove Advertisements Sponsored Links
KFX 450 Central Advertisement