|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
|
09-15-2007, 02:16 PM
|
#1 (permalink) |
|
Member
Join Date: Nov 2006
Location: Laguna Hills, CA
Posts: 81
|
First make sure you read the instructions that is provided by FuelATV. After you have read through the instructions a few times, you should be ready for the install.
Verify you have all the parts you need for the install  Lift up the quad so the rear suspension is at full droop  Looking at the shock at full droop from underneath  You can get to one of the hose clamps here  Looking down on the stock intake. You can see the two hose clamps that hold on the larger intake tube and the air temperature sensor mounted on the old air box   Crank case vent tube connection to the air box  The stock larger intake tube. Fuel is right, this thing is VERY RESTRICTIVE  Mounting the billet adapter into the new intake tube. It is a tight fit, but if you put a couple fingers on the inside of the tube and push the intake tube over the billet adapter, it will slide together without too much problem  After removing the air box completely (4 top bolts + 10 lower sub frame bolts), you can install the new intake tube  Continue to Part 2 |
|
|
| Sponsored Links | |||
Advertisement | |||
|
10-19-2007, 02:07 PM
|
#2 (permalink) |
|
Senior Member
 
Join Date: Feb 2007
Location: SANTEE
Posts: 293
|
Great job .... thanks for doing this.
__________________
We ride, test and use all the products we sell. No drop shipments, No broken promises, No BS, Just Top quality proven parts at a great price. PM me for the best prices, best service and best delivery. Everyone else talks the talk we walk the walk. FUELATV is always testing to make better products and more HP for you ........ its just the way we do it. FUELATV Air box and Air Box eliminator Intakes for the KFX450 are instock and ready to ship Dasa pipes - ALWAYS in Stock at UNBEATABLE PRICES Precision Stablizers - ALWAYS in stock and DISCOUNTED i-shock suspension - All kits instock, onsale and ready to ship FUELATV Bumpers, Cooler Racks, Anti-Vibe stems, DASA Exhaust Systems, i-shock supension, Yoshimura, Power Commanders, Custom Graphics kits, Gripper seat covers, Flexx bars, Precision Stablizers, and More. |
|
|
|
| Sponsored Links | |
Advertisement | |
 |
| Thread Tools | Search this Thread |
|
|
j/k not really 
