Ignition Module - Kawasaki KFX450 Forum

TexasKFX · 12-26-2007, 07:12 PM

Just wondering if the module is needed with the pc3 if i get say fmf or what not. did not find anything about it when i did search.

pipo · 12-26-2007, 08:40 PM

Yes in order to get the pC module you gotta have the PCIII.

pimpn8ez · 12-26-2007, 08:41 PM

nope it not needed if your just using the PCIII by itself. Fuel was doing some testing on the ignition module but have seen any results yet; keep watching

TexasKFX · 12-27-2007, 10:19 AM

Cool. I just did not want to spend another chunk of cash on thing not needed for only a pipe and lid change

pipo · 12-27-2007, 06:54 PM

QUOTE (PIPO @ Dec 26 2007, 08:41 PM)

Quote:

Yes in order to get the pC module you gotta have the PCIII.

Sorry for any confusion, I had it all backwards.

12-26-2007, 08:40 PM	#2 (permalink)
pipo Senior Member Join Date: Aug 2007 Location: Yelm, WA Posts: 271	Yes in order to get the pC module you gotta have the PCIII. __________________ D727r

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-26-2007, 07:12 PM	#1 (permalink)
TexasKFX Junior Member Join Date: Dec 2007 Location: Texas Posts: 21	Just wondering if the module is needed with the pc3 if i get say fmf or what not. did not find anything about it when i did search.

12-26-2007, 08:41 PM	#3 (permalink)
pimpn8ez Junior Member Join Date: Aug 2007 Posts: 4	nope it not needed if your just using the PCIII by itself. Fuel was doing some testing on the ignition module but have seen any results yet; keep watching

12-27-2007, 10:19 AM	#4 (permalink)
TexasKFX Junior Member Join Date: Dec 2007 Location: Texas Posts: 21	Cool. I just did not want to spend another chunk of cash on thing not needed for only a pipe and lid change

Remove Advertisements Sponsored Links
KFX 450 Central Advertisement