Air/Fuel gauge install - Kawasaki KFX450 Forum

jdmcrx05 · 09-27-2008, 09:49 PM

Hi, just thought i would make a post for doing an Air/Fuel gauge on a kfx450 for tuning purposes.I am using an autometer narrow band air/fuel gauge and a BOSCH single wire O2 sensor (11027). should work perfectly for tuning , i am going to install a Trinity EFI controller when i install the gauge tomorrow so i hope i can get a good tune..........Does anyone have a good base tune for this controller.....i am using a HMF slip-on and no air box lid. thanks

brammabull69 · 09-28-2008, 12:10 AM

sounds like a good idea. let us know how it works out so we can do it!

jdmcrx05 · 09-30-2008, 11:56 AM

http://s362.photobucket.com/albums/oo61/jdmcrx05/

still need a good map running hmf slip-on with air box lid off anyone got any suggestions

09-28-2008, 12:10 AM	#2 (permalink)
brammabull69 Junior Member Join Date: May 2008 Posts: 19	sounds like a good idea. let us know how it works out so we can do it! __________________ pcIII airbox lid off lt-r 450 intake boot ESR full system

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-27-2008, 09:49 PM	#1 (permalink)
jdmcrx05 Junior Member Join Date: Aug 2008 Posts: 3	Hi, just thought i would make a post for doing an Air/Fuel gauge on a kfx450 for tuning purposes.I am using an autometer narrow band air/fuel gauge and a BOSCH single wire O2 sensor (11027). should work perfectly for tuning , i am going to install a Trinity EFI controller when i install the gauge tomorrow so i hope i can get a good tune..........Does anyone have a good base tune for this controller.....i am using a HMF slip-on and no air box lid. thanks

09-30-2008, 11:56 AM	#3 (permalink)
jdmcrx05 Junior Member Join Date: Aug 2008 Posts: 3	http://s362.photobucket.com/albums/oo61/jdmcrx05/ still need a good map running hmf slip-on with air box lid off anyone got any suggestions

Remove Advertisements Sponsored Links
KFX 450 Central Advertisement