PLEASE HELP!!!! - Kawasaki KFX450 Forum

transam_1989 · 04-19-2009, 08:46 PM

OK, I WAS RIDIN TODAY AND MY PCIII RATTLED LOOSE, FELL OFF AND GOT TANGLED IN THE CHAIN AND BROKE ALL THE WIRES. THE BIKE OBVIOUSLY DIED, SO I TOOK THE PCIII OUT HOOKED EVERYTHING BACK UP BUT THE BIKE STILL WONT START. THE FUEL PUMP WONT KICK ON. I ONLY SEE ONE FUSE UNDER THE HOOD AND ITS GOOD. NOT SURE ABOUT THE RELAYS, BUT I SWAPPED THEM ALL OUT AND EVERYTHING IS GOOD OTHER THAN THE PUMP NOT KICKIN ON. IS THERE OTHER FUSES SOMEWHERE IM MISSING, OR ANY IDEAS? THANKS

transam_1989 · 04-20-2009, 07:03 PM

NEVERMIND. I FOUND THE OTHER FUSES, THEY ARE IN THE YELLOW BOXES UNDER THE FRONT HOOD PIECE. THERE IS TWO OF THEM IN THEREFOR THOSE OF YOU WHO DONT KNOW. BOTH CAME WITH SPARE FUSES. IT JUST SO HAPPENED A FUSE WAS POPPED. BIKE STARTED RIGHT UP AND THE PCIII IS FINE TOO AFTER BEING SOLDERED.

ononewheel · 04-21-2009, 12:13 PM

sweet !it would suck having to by a new pc3!

offroadhunter · 04-21-2009, 02:06 PM

QUOTE (ononewheel @ Apr 21 2009, 09:14 AM)

Quote:

sweet !it would suck having to by a new pc3!

Yea.. close to $300 that could be spent on other mods.

transam_1989 · 04-21-2009, 10:55 PM

deffinately happy about not spending 300 more on another pcIII.

04-21-2009, 12:13 PM	#3 (permalink)
ononewheel Senior Member Join Date: Dec 2008 Posts: 418	sweet !it would suck having to by a new pc3! __________________ 2009 monster energy kfx 450r dasa/pc3/fci/kx cams/fox floats/elka rear/hydrolic clutch/lsr stem+carrier+adjustable axle/houser mgc +2.25 a arms/hids/itp hd tires/hiper tech 3's front/rear/pro armor swingerskid+nerfs+heal /guards+footpegs/odi grips/asv levers/ims3.7gallon gas tank/cv4 green hoses/alba case saver/tag polyurithane belly skid/15fs 36 rs

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-19-2009, 08:46 PM	#1 (permalink)
transam_1989 Junior Member Join Date: Oct 2008 Posts: 12	OK, I WAS RIDIN TODAY AND MY PCIII RATTLED LOOSE, FELL OFF AND GOT TANGLED IN THE CHAIN AND BROKE ALL THE WIRES. THE BIKE OBVIOUSLY DIED, SO I TOOK THE PCIII OUT HOOKED EVERYTHING BACK UP BUT THE BIKE STILL WONT START. THE FUEL PUMP WONT KICK ON. I ONLY SEE ONE FUSE UNDER THE HOOD AND ITS GOOD. NOT SURE ABOUT THE RELAYS, BUT I SWAPPED THEM ALL OUT AND EVERYTHING IS GOOD OTHER THAN THE PUMP NOT KICKIN ON. IS THERE OTHER FUSES SOMEWHERE IM MISSING, OR ANY IDEAS? THANKS

04-20-2009, 07:03 PM	#2 (permalink)
transam_1989 Junior Member Join Date: Oct 2008 Posts: 12	NEVERMIND. I FOUND THE OTHER FUSES, THEY ARE IN THE YELLOW BOXES UNDER THE FRONT HOOD PIECE. THERE IS TWO OF THEM IN THEREFOR THOSE OF YOU WHO DONT KNOW. BOTH CAME WITH SPARE FUSES. IT JUST SO HAPPENED A FUSE WAS POPPED. BIKE STARTED RIGHT UP AND THE PCIII IS FINE TOO AFTER BEING SOLDERED.

04-21-2009, 10:55 PM	#5 (permalink)
transam_1989 Junior Member Join Date: Oct 2008 Posts: 12	deffinately happy about not spending 300 more on another pcIII.

Remove Advertisements Sponsored Links
KFX 450 Central Advertisement