new guy and new to efi
ok so i made the step from a warrior 350 to the KFX 450 and love it but i have a small issue a friend rolled it Sunday and it shut down due to the roll over sensor and have since siliconed that up and now the injector isn't firing the injector shows to be good but it is not receiving 12v on electronic start up or a pulse the relay is good and so is the fuses fuel pump is still good and everything else is good as far as i can tell and best i can figure its the ECU? any help would be appreciated
Thanks
Weston
|
12-26-2011, 06:47 PM
