stock intake fixed

[Sn0ka]

hallo kfx450 friends

step 1 :

tools :

working :

stock intake :

after :

worktime = 30 min.
$$$ = 0
hp = +++

best regards

[pipo]

Can you attached bigger pics? Is that a heat gun?

[Sn0ka]

green tool = hot-air blower

non hair dryer

have fun

[offroadhunter]

Hey, as long as it works for you and you're happy with it that matters most.

[#3'skfx]

Looking at the intake now that uve opened the inside . Does it clear the shock ? On mine it is very close n the stock form . If I got a 1/2 more opening it would hit mine for sure .

[phrozin]

I have been playing with my stock intake I did a similar thing as this guy but I used a lpg torch to remould it to about double the stock size pretty easy to do but didn’t really pick any thing up where I did pick up hp was porting the throttle body side of the intake where it fits on to the TB rubber stock mine was only 36mm so I ported to 45mm as TB was 42mm definitely picked up mid and top end but I needed to run a richer map as after porting ran quite lean right across the rev range I am waiting for new stage 2 cams atm which could be more interesting