Full XC Partout only 2 rides

[nkeen07]

Well guys, I hate to say it but I've gotta get out of racing for a while. I trashed my motor at MAXC Round 4 and due to my current financial situation I can't afford to run anymore this season w/the extensive motor rebuild I've have to do. So...this is a great opportunity to pick up some great parts / gear for cheap. Almost all of the aftermarket parts only have 2 rides on them unless otherwise noted. I am also selling off all of the OEM parts as well, as this will be a full part-out. If you let me know by early afternoon tomorrow that you're interested in something I might be able to get it out beginning of the week, but I'm headed back to work later tomorrow and I'm living 4 hours away from home where the quad is, so I won't be able to get around to getting pics and shipping other stuff out until next Saturday morning though. So...the sooner the better on hitting me up for this stuff.

Suspension

1. Exit X2 front and rear shocks set up for 180-200 lb B class XC rider
2. Ars-FX XC LT a-arms (a tiny bit of wear on the bottom of lowers that I will touch up before shipping) --- comes w/tie rods and all bushings installed
3. Ars-FX LT rear linkage w/skid (gold anodized)

For the whole package that's practically new: $2500 (send me a PM if you want it separated) --- $1000 less than new

4. 2 sets of front spindles in great condition (get extras for WHEN yours break) $75 a pair

5. 2 OEM swingarms (one powder coated flat black) $50 ea.

6. 2 sets of OEM linkages w/good bearings BOTH SOLD

7. Stock rear shock in GREAT condition $40

8. OEM a-arms in great shape. Only missing the lower pivot bearings SOLD


Motor

1. Boyesen water pump SOLD

2. PWR Oversized Radiator (used 1 season --- in good shape) SOLD

3. Kawasaki Pro Circuit Factory oil cooler from Weinen's bike (no mounting brackets) SOLD

4. Kick start kit SOLD

5. Hot Cams Stg. 3 camshafts $200

6. HMF Comp Series full system exhaust (end cap has small ding from getting hit, but barely noticable) SOLD

7. Rekluse Z-start Pro Clutch (ran last season but plates only have about 5 rides on them and they are OEM plates) SOLD

8. Rekluse clutch cover (a little scratched but in good shape) SOLD (will reduce if purchased w/clutch)

9. BRAND NEW Wiseco clutch basket still in box $150

10. Moose Poly case saver SOLD

11. Fuel ATV Intake w/box and 2 filters w/outerwears (one filter only has 2 rides and other has a bit of wear but is still a good spare) BEST mod you can do on this Kawi SOLD

12. Two Brothers Juicebox Pro fuel controller --- Better and more adjustable than the PCIII but any PC maps can be used on it. I will send you all the maps I have as well. Only on for 2 rides and worked perfect. $200

13. Kawi race adjustable ECU (doesn't have the drain issues some OEM ECU's do) SOLD

14. OEM ECU (no issues whatsoever) $30

I am having some other motor parts inspected in the next week and may make some more available if I know they're good to sell, so let me know if you need anything like cases and what not.


Wheels/Tires

1. Hiper Tech 3's w/Razr II (22x7-10) fronts and grooved Razr 6 ply rears (20x11-9) --- Fronts are 10x5 4+1's and Rears are 9x9 dual beadlocks and I believe are 4+5's. Rings are all green w/some scratches, but are in good shape. Wheels have no issues and look good. I will also include a set of mud-plugs for the rear w/Hiper stickers (one or two of the tabs that are installed are a bit bent but work well). The tires are 80-90% up front and probably about 60-70% on the rear. No leaks and rears are grooved for great handling in all conditions and terrain. Everything new would be about $1400, so I'd like to get: $800

2. Douglas G2 single beadlock (f/r) wheels w/Razr II (21x7-10) fronts and grooved Razr 6 ply rears (20x11-9) --- These wheels and tires only have 2 rides on them. Fronts are 10x5 4+1's and rears are 9x8 3+5's. One front tire is BRAND NEW w/o any riding whatsoever as the one it replaced had a very small sidewall puncture that could not be fixed. A few small dings in the rings from rocks at the second ride that I've mostly straightened out, but other than that like new. I'd say tread is at least 95% on the other 3 tires. Rears are grooved for perfect handling in all conditions. Also comes w/2 of the new style rear mudplugs and DWT stickers. Like new but better w/grooving for way less: $700


Accessories

1. ATV Four-Play +1 stem flat black(1 season but in good shape other from a little powder coat loss on wear areas) SOLD

2. ATV Four-Play Soft bars w/ODI Rogue lock-on grips (a little paint wear from brake-line but in great shape) --- Way more adjustable than Flex Bars SOLD

3. Precision Pro steering stabilizer (1 season but serviced once and in good shape) $340

4. Powermadd Handguards w/extensions and wraps (green, which is no longer available in the extensions) $50

5. Powermadd gauntlets SOLD

6. ASV Rotator Brake clamp (black) SOLD

7. Braided front and rear lines and anodized red front line clamps $45

8. Quadtech hump seat off Yokley's old quad (in PERFECT condition) SOLD

9. Stock seat w/+1" seat foam and gripper cover (very small tears at the bottom corners of the cover that aren't really noticable while on the quad) $55

10. Walsh Seat Pin Recepticals (elminate the stock tool box) SOLD

11. Walsh steering stem bottom bearing SOLD

12. IMS Quickfill oversized tank w/receiver, can and stand. Can was discolored when I bought it from another member, so I painted it black except for the indicator strip to see where the fuel is. Dust cover for receiver has small crack but doesn't affect anything (even if it did they're only $10). Also has one way valve on the vent. $550

13. Brand new ODI lock-on grips in package SOLD

14. 2 PRM Summit front bumpers (One is painted flat black w/only 2 rides and will be like new when recieved. The other is unpainted original aluminum and had one bar fixed by a professional welder (can hardly notice when more than 10 feet away. These are the first generation summit bumper which are much stronger than the new ones b/c of the design. $70 for black and $50 (SOLD) for other

15. IMS Pegs SOLD

16. X-Factor Motorsports netted heel-guards. Black w/polished plates. Only 2 rides but will touch up from boot scuffs before shipped. Zip-tied nets to prevent snagging. Don't mount to subframe to eliminate flex issues. Will include fender brackets. Very nice heelguards. SOLD

17. Brand NEW X-Factor Motorsports Pro-Am nerfbars w/all mounting hardware. Never mounted up b/c I decided to try running w/o nerfs this year. Powdercoated flat black. Would mount up well w/IMS or stock pegs. SOLD

18. Brand NEW IMS heel guards. Polished. Never mounted since I went w/X-Factor instead. Not made anymore...so get them now. SOLD

19. Black Renthal Fat bars $30 PENDING

20. Lonestar rear TRX caliper Conversion bracket and TRX caliper w/good EBC Severe Duty pads. Made an incredible difference in rear brake feel. Get rid of that crappy Kawi rear caliper and you won't regret it. SOLD

21. 2 OEM axles. One is like new w/just the 2 rides on it. Both were protected and barely have a scratch on them. The one w/2 rides on it barely even has any wear on the bearing locations. Both will come with Primary Drive 39 tooth spockets and sprocket hubs in great shape. $75 for like NEW and $45 for other

22. Rear hubs powdercoated flat black $15

23. 2 sets of front hubs w/rotors. One set needs new bearings pressed in, which I have for extra. Rotors all good w/good life left and no warping. $50 for good set (SOLD) and $20 for other (PENDING)

24. All Balls front wheel bearings (2 sets) $10 (Will discount if purchased w/hubs)

25. Brand NEW Tusk wave rear brake rotor (Never installed) SOLD

26. Pro-Tect stainless steel swingarm skid. Was running a 39T rear sprocket, so chain got into the wear strip a tiny bit, but other than that it's in good shape besides the normal scratches and will come w/the mounting hardware. If you aren't familiar, these run $150 new and they last way longer while getting much better ground clearance than aluminum skids. $70 PENDING

27. 2 rear bearing carriers w/good OEM bearings. One is a new carrier just installed w/new OEM bearings. Only one ride on it and just minor blemishes from going on and off. Other was ran for 7 races, but the bearings were tight when it came out. $75 for newer one and $40 for other

28. 2 sets of EBC severe duty front pads NEW in packages $28

29. Quick adjust clutch lever. A bit of play...but works good. $8

30. 2 OEM rear calipers w/parking brake block-offs and good pads $20 ONE SOLD

31. EBC severe duty rear pads NEW in package SOLD

32. OEM cylinder head gasket and base gasket NEW in package SOLD

33. PRM Baja grab bar painted flat black. A tad tweaked behind mounts $20

34. 24 volt starting set-up SOLD

35. Dirt bike kill switches --- One is pre-wired to plug into the harness to use for starting and one is NEW in the box SOLD

36. Kawi TPS Sensor leads SOLD

37. Kawasaki accessories full frame skid --- Pretty scarred up but would do well. Cut very small slots for mounting w/hose clamps as my bottom frame nuts were spinning. $25

38. Tusk case saver $5

[nkeen07]

[nkeen07]

And a pic of the quad before (without the grooved rear tires):

[Djr-xc-racer29]

How much for the green outer rear fenders??

[nkeen07]

Originally Posted by Djr-xc-racer29

How much for the green outer rear fenders??

Sold already. Sorry man

[nkeen07]

[QUOTE=nkeen07;26516]Well guys, I hate to say it but I've gotta get out of racing for a while. I trashed my motor at MAXC Round 4 and due to my current financial situation I can't afford to run anymore this season w/the extensive motor rebuild I've have to do. So...this is a great opportunity to pick up some great parts / gear for cheap. Almost all of the aftermarket parts only have 2 rides on them unless otherwise noted. I am also selling off all of the OEM parts as well, as this will be a full part-out.
Suspension

1. Exit X2 front and rear shocks set up for 180-200 lb B class XC rider
2. Ars-FX XC LT a-arms (a tiny bit of wear on the bottom of lowers that I will touch up before shipping) --- comes w/tie rods and all bushings installed
3. Ars-FX LT rear linkage w/skid (gold anodized)

For the whole package that's practically new: $2200 (send me a PM if you want it separated) --- $1000 less than new

4. 2 sets of front spindles in great condition (get extras for WHEN yours break) $75 a pair

5. OEM swingarm $50

7. Stock rear shock in GREAT condition $40

Motor


5. Hot Cams Stg. 3 camshafts $200

9. BRAND NEW Wiseco clutch basket still in box $150

I am having some other motor parts inspected in the next week and may make some more available if I know they're good to sell, so let me know if you need anything like cases and what not.



Accessories



3. Precision Pro steering stabilizer (1 season but serviced once and in good shape) $320


12. IMS Quickfill oversized tank w/receiver, can and stand. Can was discolored when I bought it from another member, so I painted it black except for the indicator strip to see where the fuel is. Dust cover for receiver has small crack but doesn't affect anything (even if it did they're only $10). Also has one way valve on the vent. $500

21. 2 OEM axles. One is like new w/just the 2 rides on it. Both were protected and barely have a scratch on them. The one w/2 rides on it barely even has any wear on the bearing locations. Both will come with Primary Drive 39 tooth spockets and sprocket hubs in great shape. $75 for like NEW and $45 for other


33. PRM Baja grab bar painted flat black. A tad tweaked behind mounts $20

[rummy21]

how much just for the beadlocks no tires

[bmann400]

how much for the frame.