bcs motor bulid - Kawasaki KFX450 Forum

kevinpowerski · 08-13-2008, 08:50 PM

I have just sent off a motor to jay and donald at BCS PERFORMANCE they had lot good info to share .Well I am going to have the tranny polished and the head well be ported and new connecting rod since they are weak if left stock . I am just excited to get it back. I well post all details here once it is done the dyno numbers well be posted and all stock numbers. All parts used these guys have been great to me so far and helpful to me. I have been using there intake it really makes the kfx what it she be . the prouduct is nice and fits well it looks clean. has any body else got one of there motors and what did you do to it

offroadhunter · 08-13-2008, 09:08 PM

I'm excited for you! Can't wait to hear how it performs and see some numbers!

KawiRider55 · 08-14-2008, 01:40 PM

I brought my Kawi to BCS in January of this year and had them rebuild the bike. It was Josh Creamer's practice bike and needed to be redone. BCS put their intake on it and added a high compression piston and Webcams. I race in the NEATV series and I can tell you that the bike screams. I am pleased with their service and would recommend them. Jay really knows how to build a reliable race engine.

kevinpowerski · 08-15-2008, 09:05 PM

QUOTE (KawiRider55 @ Aug 14 2008, 01:41 PM)

Quote:

I brought my Kawi to BCS in January of this year and had them rebuild the bike. It was Josh Creamer's practice bike and needed to be redone. BCS put their intake on it and added a high compression piston and Webcams. I race in the NEATV series and I can tell you that the bike screams. I am pleased with their service and would recommend them. Jay really knows how to build a reliable race engine.

That is good to hear they have been awesome to us and we really look forward to having them build several motors for us I should get my motor back by the 26 of august I well post the info right away
CHECK BACK

**Atving4Christ** · 08-18-2008, 08:05 PM

Cant wait for the review.

larry

kevinpowerski · 09-03-2008, 05:22 AM

Hey just got word on my motor they are just wating for the tranny to get sent back from cv4 stay close I should have it back soon

stickitracing · 09-08-2008, 04:03 PM

Can't wait to hear the results!

kevinpowerski · 09-24-2008, 04:57 PM

Sorry guy still waitin on bcs

mxrider38 · 09-26-2008, 07:08 PM

What is the benefit of polishing the tranny? I am getting ready to split my cases for a falicon rod and was wondering if I should consider. I already have cams, port & polish, high comp, etc.

BCS · 10-02-2008, 08:45 PM

QUOTE (MXrider38 @ Sep 26 2008, 07:09 PM)

Quote:

What is the benefit of polishing the tranny? I am getting ready to split my cases for a falicon rod and was wondering if I should consider. I already have cams, port & polish, high comp, etc.

Polishing the transmission will help the gears last longer, create much smoother shifting, keeps engine oil cooler by having less drag, You can typically see about 2 H.P. from polishing all your transmission parts.

After Kevins tranny tooks so long to get back from the polishing company we have purchased all the equiptment to do this procedure in house. The Polishing runs about $250 per engine and turnaround is about 1-2 days.

08-18-2008, 08:05 PM	#5 (permalink)
Atving4Christ Administrator Join Date: Oct 2006 Posts: 217	Cant wait for the review. larry __________________ HAD kfx400 (504cc) HAD kfx450r Now Have: Two Feet

09-08-2008, 04:03 PM	#7 (permalink)
stickitracing Member Join Date: Mar 2008 Posts: 32	Can't wait to hear the results! __________________ KFX450R Pipe, intake, fuel controller and some other extras....

09-26-2008, 07:08 PM	#9 (permalink)
mxrider38 Senior Member Join Date: Jul 2008 Location: Mechanicsville, MD Posts: 113	What is the benefit of polishing the tranny? I am getting ready to split my cases for a falicon rod and was wondering if I should consider. I already have cams, port & polish, high comp, etc. __________________ Fully built Dasa motor(close to 60 hp), Dasa intake & pipe, Hinson clutch basket,PC III, PWR radiator & hoses, Roll Design steering stem & control arms, Elka factory front/rear shock, Elka system 3 stabilizer, Ims-Roll nerf bars, footpegs, front/rear grab bars & hand guards, Quad-Tech hump seat, hood scoop & rad. scoop, Renthal bars, Douglas wheels, Streamline front/rear brake lines, RPM axle, One Industries graphics, and prolly some other stuff i forgot!

08-13-2008, 08:50 PM	#1 (permalink)
kevinpowerski Member Join Date: Feb 2008 Location: colorado Posts: 84	I have just sent off a motor to jay and donald at BCS PERFORMANCE they had lot good info to share .Well I am going to have the tranny polished and the head well be ported and new connecting rod since they are weak if left stock . I am just excited to get it back. I well post all details here once it is done the dyno numbers well be posted and all stock numbers. All parts used these guys have been great to me so far and helpful to me. I have been using there intake it really makes the kfx what it she be . the prouduct is nice and fits well it looks clean. has any body else got one of there motors and what did you do to it

Remove Advertisements Sponsored Links
Kawasaki KFX450 Advertisement

08-13-2008, 09:08 PM	#2 (permalink)
offroadhunter Super Moderator Join Date: Oct 2007 Location: Anthem, AZ Posts: 647	I'm excited for you! Can't wait to hear how it performs and see some numbers!

08-14-2008, 01:40 PM	#3 (permalink)
KawiRider55 Junior Member Join Date: Apr 2008 Posts: 2	I brought my Kawi to BCS in January of this year and had them rebuild the bike. It was Josh Creamer's practice bike and needed to be redone. BCS put their intake on it and added a high compression piston and Webcams. I race in the NEATV series and I can tell you that the bike screams. I am pleased with their service and would recommend them. Jay really knows how to build a reliable race engine.

09-03-2008, 05:22 AM	#6 (permalink)
kevinpowerski Member Join Date: Feb 2008 Location: colorado Posts: 84	Hey just got word on my motor they are just wating for the tranny to get sent back from cv4 stay close I should have it back soon

09-24-2008, 04:57 PM	#8 (permalink)
kevinpowerski Member Join Date: Feb 2008 Location: colorado Posts: 84	Sorry guy still waitin on bcs