Kawasaki KFX450 Forum - KFX450Central banner
1 - 14 of 14 Posts

·
Premium Member
Joined
·
293 Posts
Discussion Starter · #1 ·
The FUELATV KFX450 intakes will be shipping on 9/13/2007. If you have one on order an e-mail will be sent to the e-mail address used on your paypal payment. We now have everything for the kit. The kit will include everything you need to bolt it on ...... New black powdercoated aluminum mounting bracket, Oversized billet velocity stack filter ataptor, K&N style filter with an inverted end cap, water repellant outerwear, NEW high flow intake tube, adaptor for crank case breather hose, all hardware and instructions. I will post some photos up next week.

FUELATV
 

·
Registered
Joined
·
81 Posts
SWEET!!!

I hope you will have some new PCIII maps for your intake.
  • Stock pipe (w/ & w/o sparky)
  • DASA EDIT <strike>13"/9"</strike> 16"/13" (w/ & w/o quite core)
At least that would be my wish


Although, once I get the pipe, I'll need to get a dyno tune, to get my bike 'dialed in'


Edited my stupidity
13"/9" changed to 16"/13"
 

·
Premium Member
Joined
·
293 Posts
Discussion Starter · #3 ·
I just got Dasa 13" version pipes instock. Dasa pipes come standard in the 16" version. i have the 13" version custom made for me. There is not a 9" version. It would be WAY TOO LOUD. i will have these maps available

Stock pipe, no baffle, FUELATV intake and a power commander

Dasa pipe, Stock air box, no lid and a power commander

Dasa pipe, FUELATV intake and a power commander

I may make maps with quiet cores in, but it wont be for awhile.

FUELATV
 

·
Premium Member
Joined
·
293 Posts
Discussion Starter · #5 ·
The version i have now will eliminate the air box. I have the air box in production now and it will be available in 2 weeks. The air box eliminator intake is $239.99 and it comes with a new black powdercoated aluminum mounting bracket, Oversized billet velocity stack filter ataptor, K&N style filter with an inverted end cap, water repellant outerwear, NEW high flow intake tube, adaptor for crank case breather hose, all hardware and instructions. The air box version will be $349.99 and it will come with New black powdercoated aluminum air box, Oversized billet velocity stack filter ataptor, K&N style filter with an inverted end cap, water repellant outerwear, NEW high flow intake tube, adaptor for crank case breather hose, all hardware and instructions. The air box will be available separtly for $129.99
 

·
Premium Member
Joined
·
293 Posts
Discussion Starter · #8 ·
Doing my best to get them. It will be a few more weeks. I now have the 13" pipes. We are doing the final touches on the aluminum air box version of the FUELATV intake. Once the box design is finalized i will make the maps.
 

·
Premium Member
Joined
·
293 Posts
Discussion Starter · #10 ·
Thanks i appreciate your patience ....... the kits are now instock and shipping. If you have one on order it shipped today.
 

·
Registered
Joined
·
81 Posts
QUOTE (FUELATV @ Sep 12 2007, 01:17 PM) index.php?act=findpost&pid=3324
Thanks i appreciate your patience ....... the kits are now instock and shipping. If you have one on order it shipped today.
Nice, can't wait


Fuel, a quick question. What cleaning / oiling products do you recommend for this new setup? I'm going to the SSSS in two days and I will pick up some if/when I can find it.

Danka,
Larry
 

·
Premium Member
Joined
·
293 Posts
Discussion Starter · #12 ·
I use the K&N filter cleaner and filter oil.
 

·
Registered
Joined
·
81 Posts
QUOTE (FUELATV @ Sep 12 2007, 03:43 PM) index.php?act=findpost&pid=3330
I use the K&N filter cleaner and filter oil.
Came home today from work and there is a beautiful FuelATV box sitting on my stairs. Nice. What is that Fuel, 1 day shipping to my door from yours.
Boy, I love it.

Nice setup and instructions look very clear and precise. I think I'll go down to the garage and do the install... Yep, that is what I'll do


Thanks,
Larry
 
1 - 14 of 14 Posts
Top