Kawasaki KFX450 Forum - KFX450Central banner
1 - 8 of 8 Posts

· Registered
19 Posts
Discussion Starter · #1 ·
ok, so i adjusted my valves. only the exhaust was out of spec. i put the new shims in and rechecked them all and all were within spec now. now my quad wont start with the electric start. we pull started it and i put it in 2nd gear once we got goin and let the clutch out and it fired up instantly. i let it warm up for a few mintues and rode it around a little bit and it ran perfect, pulled hard and everything. i tried disconecting the PC3 and didnt do anything. i am stumped and wanted to see if you guys had any ideas.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.